Hãng sản xuất: Braun vietnam

Xuất sứ: Germany

Nhà cung cấp: STC Vietnam

A5S1DD3

Sensor A5S1DD3 for detection of rotational speed and direction of rotation in Hazardous Areas Zone 0 or 1 and highest safety requirements up to SIL3

The BRAUN Speed Sensors Series A5S1 are TÜV certified for SIL3 acc. IEC 61508:2010 and therefore meet the high SIL3 standards. To meet the specific requirements of hazardous areas (Ex Zone 0 or 1) we provide these specialized types which are certified for ATEX/IECEx, as well as for other international standards such as UL/CSA and EAC (Russia, Kazakhstan, and the Belarus Customs Union). A5S1 sensors in conjunction with our Isolating Barrier D461 provide an intrinsically safe implementation to meet these specific requirements.

The correct choice of sensor is always a prerequisite to achieving a successful solution. Therefore BRAUN A5S1 sensors base on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. They are contact-free, wear-free, maintenance-free and unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S1 sensors especially suited for all applications where high levels of accuracy and reliability are at a premium.
In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.

Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics.
The stainless steel sensor housing is sealed at the front and is pressure resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.

Key Features

• SIL3/IEC 61508:2010 certified by TÜV
• Detection of rotational speed and direction of rotation in Hazardous Areas Zone 0 or 1
• Speed range from 0 Hz to 25 kHz
• Dual Channel,
  1 track = rotational speed as frequency, 1 track = F/R status as binary signal
• Air gap to the target/pole wheel up to 2.5 mm (depending on the profile size)
• Temperature range -40…+125 °C (-40…+255 °F)
• Differential principle diminishes the influence of external magnetic stray fields and machine vibration
• Sealed stainless steel enclosure > 200 bar pressure to sensor tip
• Available for connection via tight plug, or with firmly attached cable (PVC or Teflon® insulated)
• Powerful square wave output signal equally high over the entire speed range
• Sensor short circuit proof and protected versus polarity error
• Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material
• Requires Isolating Barrier D461
• For installation in hazardous areas as intrinsically safe operating resource
  • ATEX/IECEx certified for Ex ia IIC T4/T6 Ga
  • UL/CSA certified for Class I, Div 1, Groups A, B, C, D
  • EAC certified for Ex ia IIC T4/T6 Ga

Benefits

• Contact-free with a large air gap, so the potential for damage is eliminated
• Wear-free due to its unique design principle
• Maintenance-free during Lifetime, therefore minimized TCO
• Unsusceptible versus external magnetic stray fields and machine vibration
• Operates down to zero speed
• Can not be damaged by faulty wiring
• Almost every target profile can be used
• A5S1 sensors do not influence each other, no mounting distance in between is required

======================================================

Xem thêm A5S31B90 – Cảm biến tốc độ – Braun

Xem thêm các sản phẩm Braun Vietnam

======================================================

STC là đại lý chính hãng Braun tại Việt Nam cung cấp sản phẩm A5S31B90 – Cảm biến tốc độ – Braun. Một số mã chúng tôi có sẵn kho. Vui lòng liên hệ ngay để nhận được giá tốt nhất.

Sẵn giá – Báo ngay –  Bảo hành 12 tháng – Tư vấn, lắp đặt 24/7

Hotline: 0898 788 268

Email: ha@songthanhcong.com