DX2-3000-EDM-G – Thiết bị đo lực căng – Hans Schmidt

DX2-3000-EDM-G – Thiết bị đo lực căng – Hans Schmidt – Song Thành Công

 

Tên: DX2-3000-EDM-G – Thiết bị đo lực căng

Model: DX2-3000-EDM-G

Nhà sản xuất: Hans Schmidt

Đại lý phân phối: Song Thành Công

Thông tin sản phẩm:

Thông tin sản phẩm chi tiết tại đây

 

• The analog display of tension meter DX2-EDM enables an optimal process adjustment
• Easy to operate
• Roller shifting mechanism ensure easy acquisition of the running material
• Hand-held unit with built-in mounting holes permit fixed installation for continuous tension measurement
• Special finger support located on the rear side reduces the effort to move the outer roller assembly
• Everything in operator’s view:
  – the guide rollers
  – the measured material

  – the readings

• Ball-bearing mounted, V-grooved guide rollers
• Each instrument is individually calibrated for highest accuracy
• 41 mm Ø scale
• Tension meter with rugged aluminium housing
• Certificate of Compliance with the order 2.1 according EN 10204 is included
• Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Các model sản phẩm khác:

Balluff	BES014M BES M08EF-PSC40F-S49G Inductive Sensors
Baumer	Code: 11071375 Description: OG72 DN 1024 TTL Encoder
Burkert	449671 Insertion MID flow transmitter
Clage	S 50 storage water heater 50 l CLAGE Item ID: 4100-43850 S50 2kW 220–240V, 1 ~, with plug Hot water storage heater (50 litre capacity) with unvented internal enamel-coated steel tank, temperature selection between 8°C and 70°C with thermometer to display the actual temperature, operating display, thermostat with overheating protection, highly effective PU hard foam insulation, magnesium protection anode, water connector ½ inch, IP25D.
Clage	S10-O 10l oversink storage water heater CLAGE Item ID: 4100-41103 S 10-O 2.2kW 230V, 1 ~, with plug Small storage water heater as oversink unit with unvented internal copper tank (10 litre capacity). Suitable for both open-outlet and – in connection with a safety assembly – for closedoutlet installation (also with two taps). Electromechanical temperature control, temperature selection between 5°C and 80°C with three detent positions at 35°C (ECO), 55°C and 80°C (MAX), highly effective thermal insulation, with automatic frost protection, operating display, resettable safety temperature limiter, water connector ½ inch, IP24
Clage	SG safety group / oversink inst CLAGE Item ID: 4100-0011 Ihre Pos-Nr. Accessory Mandatory accessory for closed outlet installation depend on water pressure onsite
Clage	SGM safety group for S10-O/S15-O CLAGE Item ID: 4100-0012 Ihre Pos-Nr. Accessory Mandatory accessory for closed outlet installation depend on water pressure onsite
Elco Holding	Code: EC50C10-P6M5R-1000 Encoder
Elco Holding	Code: M125PSF-0020-W Cable connector
Euchner	Article: STA3A-4131A024M Order no.: 099480 SAFETY SENSING
Euchner	Article: RADIUSBETAETIGER-S-LR-LN Order no.: 096844 Actuator
Euchner	Article: M5X10/V100 Order no.: 073455 Safety screws
Euchner	Article: EMP-B2 Order no.: 093458 Mounting plates
Euchner	Article: EMP-SB Order no.: 093456 Mounting plates

 

NGUYỄN VĂN TÚ

PHONE: 035 964 3939 (ZALO) – 0914 141 944

EMAIL: vantu@songthanhcong.com

Cung cấp sản phẩm chính hãng, giá cạnh tranh !